It is important to clean your Philips Avent manual breast pump before the first use and after each use. Find out how to maintain good breast pump hygiene below.
Note: Cleaning and disinfecting is especially important if your baby is less than 2 months old, was born prematurely or has a weakened immune system due to illness or medical treatment. To ensure proper hygiene, perform the disinfecting step at least once a day.
How to clean and disinfect Philips Avent manual breast pump?
Published on 05 July 2024
Instructions for cleaning and disinfecting the Philips Avent manual breast pump
Step 1: Disassembling
Disassemble the breast pump and bottle completely. Also remove the (white) valve from the pump body and the stem from the silicone diaphragm.
Step 2: Cleaning
The parts can be cleaned manually or in the dishwasher.
Manual cleaning
If you are going to clean your manual breast pump manually, you are going to need the following supplies:
If you are going to clean your manual breast pump in the dishwasher, you will need the following supplies:
Follow these steps:
To disinfect your manual breast pump, you are going to need:
Follow these steps:
Disassemble the breast pump and bottle completely. Also remove the (white) valve from the pump body and the stem from the silicone diaphragm.
Step 2: Cleaning
The parts can be cleaned manually or in the dishwasher.
Manual cleaning
If you are going to clean your manual breast pump manually, you are going to need the following supplies:
- Mild dishwashing liquid
- Drinking-quality water
- Soft, clean brush used only for infant feeding items
- Clean tea towel or drying rack
- Clean bowl used only for infant feeding items
- Rinse all parts under a running tap with lukewarm water. Do not place the parts in a sink to rinse.
- Place all parts in a clean bowl.
- Add warm water and some mild dishwashing liquid.
- Clean all parts with a cleaning brush.
- Thoroughly rinse all parts by holding them under a running tap with cold, clear water.
- Clean the bowl and the brush. Rinse them well and allow them to air-dry after each use. Wash them by hand or in a dishwasher at least every few days.
- Leave all parts to air-dry on a clean, unused tea towel or drying rack in an area protected from dirt and dust. Do not use a tea towel to rub or to pat the items dry.
If you are going to clean your manual breast pump in the dishwasher, you will need the following supplies:
- Mild dishwashing liquid or a dishwashing tablet
- Drinking-quality water
Follow these steps:
- Place all parts on the top rack of the dishwasher.
- Put dishwashing liquid or a tablet in the machine. Run a standard program using hot water and a heated drying cycle (or sanitizing setting).
- Remove the parts from the dishwasher with clean hands. If items are not completely dry, place items on a clean, unused tea towel or paper towel to air-dry thoroughly before storing. Do not use a tea towel to rub or pat the items dry.
To disinfect your manual breast pump, you are going to need:
- A household pot
- Drinking-quality water
Follow these steps:
- Fill a household pot with enough water to cover all parts and place all parts in the pot. Let the water boil for 5 minutes. Make sure that the parts do not touch the sides and bottom of the pot.
- Allow the water to cool down.
- Gently remove the parts from the water. Place the parts on a clean surface, an unused clean tea towel or a drying rack to air-dry.
- Store the dry items safely until needed. Ensure that the clean pump parts, bottle brushes and wash bowls have air-dried thoroughly before storing. Items must be completely dry to help prevent germs and mold from growing. Store the dry items in a clean, protected area.